Sandblasting and Powder Coating Alu Rims


You can choose different color from the RAL color scheme and create entry under shopping cart notes.

If you want your wheels to print with Water Transfer Print, write your wishes under the notes in the process of purchase or email us at

More details

37,00 €

  • Peskanje in barvanje

More info

Sandblasting of metal and aluminium wheel rims is carried out in a blasting cabinet. It is important to choose an appropriate blasting agent for this procedure; we use a special mix of glass beads. When the wheel rim has been sandblasted, we powder coat it. Metal wheel rims are first coated with a primer metal paint. Customers can choose the final colour they desire.

Restoration of metal and aluminium wheel rims

  1. Cleaning and preparing the surface of the wheel rim with sandblasting, ensuring that the surfaces are clean and ready for further treatment (powder coating).
  2. Potential repairs are carried out (welding, grinding).
  3. If needed and depending on the type of wheel rim, we can perform fine sandblasting (with glass beads, sodium bicarbonate or crushed walnut shells) before the powder coat is applied.
  4. Next we powder coat the wheel rim.
  5. The metal or aluminium wheel rim is placed in a furnace that heats the material to 180 °C.
  6. We wait for the wheel rim to cool. Upon request we also install the wheel rims. The entire process is completed in one day!

The advantages of powder coating

  • The products can be collected and used immediately after the powder coating process is completed.
  • The work pieces acquire a greater resistance to scratches and hits.
  • The work pieces acquire a greater resistance to heat, corrosion (rust), and chemicals.
  • The appearance of the products after powder coating is flawless; the coating adheres to the surface without paint runs.
  • The lifespan of the product is increased.
  • Attractive prices for renovation and restoration of products.
  • Powder coating increases the solidness of the products, because it produces a much thicker coating than ordinary liquid coatings; powder coating adheres to the surface without paint runs.
  • Powder coatings do not contain dangerous chemicals or solvents that can be found in conventional liquid paints.

We use various blasting agents. Owing to more than 40 years of experience we can offer you help and advice when choosing a suitable blasting agent. Wheel rim sandblasting in the blasting cabinet is performed with steel chips, corundum, glass beads, sodium bicarbonate, and crushed walnut shells as abrasive agents.

Wheel rim sandblasting with steel chips and corundum is carried out in a blasting cabinet measuring 6m x 4m x 12m; sandblasting using glass beads, crushed walnut shells or sodium bicarbonate is performed in a blasting cabinet measuring 3,5m x 3,5m x 10m.

Check our website for more detailed information.